ترموستات 220V دیجیتال HW-W3001

مشخصات :

• ولتاژ: AC 220V
• محدوده اندازه گیری دما: -50 ~ 110
• محدوده کنترل دما: -50 ~ 110
• دقت کنترل دما: 0.1
• توان بار: 1500W
• سنسور اندازه گیری :  ضد آب NTC10K 1M
• خروجی: حداکثر 10A

SPECIFICATION:

• Voltage: AC 220V
• Temperature Measurement Range: -50~110℃
• Temperature Control Range: -50~110℃
• Temperature Control Precision: 0.1℃
• Load Power: 1500W
• Measuring Input: NTC10K 1M waterproof probe
• Output: Max 10A
• Installation Hole Distance: 73mm / 2.87″
• Size: 60 x 45 x 31mm / 2.36 x 1.77 x 1.22″
  

Instruction

1. Setting the starting temperature: Press the button once to display the starting temperature. Press the button for about 3 seconds for a long time. The number of starting temperature will flicker. The required temperature can be set by the button up and down.
2. Setting the stop temperature: Press the key once to display the stop temperature. Press the key for about 3 seconds for a long time. The stop temperature number will flicker. The required temperature can be set by the up and down keys.
Heating mode:
1. Setting essentials: Start-up temperature < stop temperature (the program automatically judges working mode as a heating mode).
2. Settings:
Press the up button for a long time, after flicker, and set the start temperature by the upper and lower keys.
Press the down button for a long time, after flicker, and set the stop temperature by the upper and lower keys.
How to set it up:
1. Determine the working mode as heating mode, starting temperature < stopping temperature.
2. Press the up key button for a long time. When the temperature value flickers, press the upper and lower buttons to adjust the temperature. The starting temperature is 41°C.
3. Press the down key button long. When the temperature value flickers, the upper and lower keys are pressed to adjust the temperature, and the stop temperature is 51°C.
Refrigeration mode:
1. Setting essentials: Start-up temperature > stop temperature (the program automatically judges the working mode as refrigeration mode)
2. Settings:
Press the up button for a long time, after flicker, and set the start temperature by the upper and lower keys.
Press the down button for a long time, after flicker, and set the stop temperature by the upper and lower keys.
Use cases:
Control cabinet radiator, heat dissipation to 24°C stop, temperature rise to 32°C again start radiator.
How to set it up:
1. Determine the working mode as a refrigeration mode. Start temperature > stop temperature.
2. Press the up key button for a long time. When the temperature flickers, press the upper and lower buttons to adjust the temperature. The start-up temperature is 32 °C.
3. Press the down key button long. When the temperature flickers, press the upper and lower keys to adjust the temperature, and the starting temperature is 24 °C.