ماژول گیرنده 1 کاناله 433MHz کدلرن قابدار

مشخصات :

• بدون ریموت کنترل
• کدلرن -ASK – RF
• حالت کار: لحظه ای ، حافظه دار، الاکلنگی.
• ولتاژ ورودی: DC 10 ~ 14 ولت
• رله : 250v-10A
• فرکانس RF: 433 مگاهرتز
• حساسیت دریافت:> 97dbm
• محدوده کنترل از راه دور:> 100 متر (فضای آزاد).
• ابعاد برد : 3.5 * 3.0 * 1.8 سانتی متر
• ابعاد قاب : 3.9 * 3.5 * 2.5 سانتی متر
• طراحی برد به گونه ای میباشد که عمل لرن کردن ریموت و تعویض حالت های کاری با یک کلید انجام میشود.

نحوه استفاده :

1-  حالت لحظه ای (Momentary) : یکبار کلید روی برد  فشار دهید.

2-  حالت الاکلنگی  (Toggle) : دوبار کلید روی برد را فشار دهید.

3-  حالت حافظه دار  (Latching) : سه بار کلید روی برد را فشار دهید.

Technical Data:

• Input Power:DC10V-14V
• Standby Current:<5MA
• RF Frequency:315M or 433M
• RF working mode:superheterodyne
• Receive sensitivity: >97dbm
• Transmitting distance:>100m ( open space)
• Decoding mode:MCU software decoding
• Remote storage:0pcs
• Support remote type: Learning code, Fixed code(Rolling code can be design)
• Working mode:Momentary, Toggle, Latching Time delay (5s ,10s ,15s )
• Wiring type:fixed terminal
• Output Terminal :NO , NC , COM
• Dimension of PCB:35*30*18mm  (L,W,H)

Wiring diagram 1:          

• +V : 12V + input;
• – V:  12V – input;
• NO:  Output, normal open;
• COM:Output, common;
• NC:  Output, normal close;

Learning the code: (momentary):

• Push the learning key on the receiver once, initiate momentary mode learning.
• Just wait for the LED switches on.
• Push the remote button, LED indicator on the receiver board will flash and switch off.
• After 3 seconds, learning successfully.

Learning the code: (Toggle):

• Push the learning key on the receiver twice, initiate toggle mode learning.
• Just wait for the LED switches on.
• Push the remote button, LED indicator on the receiver board will flash and switch off.
• After 3 seconds, learning successfully.

Learning the code: (Latching):

• Note: for latching mode, in order to learn more remote controls, you will need two different buttons, first button for “ON”, second button for “OFF”.
• For example: button A = ON, button B = OFF
• Push the learning key on the receiver 3 times, initiate latching mode learning.
• Just wait for the LED indicator on the receiver board flashes and switches on.
• Push the remote button A. LED flashes 5 times.
• Push the remote button B.Led flashes 5 times.
• After 3 seconds, the LED indicator switches off again, learning successfully.
• A = ON , B = OFF.

Learning the code: (Time delay mode)Using the description below to set up the following mode.

• Push the learning key on the receiver 4 times, set up for 5 seconds delay.
• Push the learning key on the receiver 5 times, set up for 10 seconds delay.
• Push the learning key on the receiver 6 times, set up for 15 seconds delay.
• The LED indicator switches on.
• Push the remote button, LED flashes and switch off.
• After 3 seconds, learning successfully.

Receiver Code Resetting/Clearing:

Press learning key on the receiver 8 times, LED indicator on the receiver flashes and switches off. Note that after resetting the receiver, all the paired remote controls will have to be re-paired in order to control the receiver again.